phone0031-387850973 Tue til Sat 10 am to 17 pm
info

You have reached the minimum number

Shopping cart (0)

There are no products in your shopping cart yet.

Guide for NT cylinder sets

Guide for NT cylinder sets

Guide for NT cylinder sets!

To help you narrow down your search for a cylinder set for your Honda four-stroke moped, we made a list. In this list you will find which set fits your model.

Please check first if your engine is an actual new type (NT) engine. In the list below the models are listed with NT-type engine. Is your model not listed in this list?
Please read further in our blog about OT cylinder sets. Is your model also not listed in that list, please contact us.

Models with a new type (NT) engine:

New type engines are recognizable by its 12 volt electrical system with CDI ignition, also referred to as electronic ignition. Honda engine codes: GB4, GK4 or GB2

  • Honda C50 NT, C70 NT (please check your engine code)
  • Honda Dax (type AB23)
  • Honda Benly (CD50 or CL50)
  • AGM Caferacer, Luxury or Strada
  • Hanway RAW50
  • Kymco Active
  • Skyteam DAx, PBR, Monkey, T-rex
  • Jincheng Dax, PBR, Monkey
  • Zhenhua Dax Honda Monkey
  • Sachs Madass
  • Zongshen & Lifan: 50cc, 70cc

If you confirmed your moped has a new type engine, please search the list below for the desired displacement. When you decide to keep using your old cylinder head, please pay attention if the desired set fits with your current head. Its also possible to replace the cylinder and the cylinder head at the same time.

PLEASE NOTE!
We assume that engines are original! If you are doubting that your engine is original, please contact us!

Do you have further questions after reading this blog, please ask them on the bottem of this page.

Please search for the article number to see the set.

50cc sets

70cc sets for NT 50cc cylinder head:

70cc sets for NT 70cc cylinder head:

  • 1030090015 70cc steel, 72cc imprint, including cylinder head
  • 1110008351 70cc steel, 49cc imprint, including cylinder head
  • 1110008721 70cc steel, 72cc imprint, replica
  • 1110000241 70cc steel, Japanese, honed, only GB2! with trade-in cylinder
  • 1110000243 70cc steel, Japanese, honed, only GB2! without trade-in cylinder

85cc sets

  • 1110001025 85cc steel, 49cc imprint, including cylinder head
  • 1110001148 85cc steel, 49cc imprint, for 50cc cylinder head
  • 1110005678 85cc steel, 49cc imprint, for 70cc cylinder head
  • 1030090067 85cc steel, 72cc imprint, for 70cc cylinder head

 
  Coos     10-11-2018 10:51     Comments ( 3 )
Comments (3)
 Mees -  27-03-2021

Als je van 50 naar 70cc gaat, is het dan nodig om een grotere carburateur te nemen? (Hanway 50 raw 2018)

 Marco -  18-03-2021

Hoi, hebben jullie ook 70 of 85cc setjes die op een mash fifty (euro 4) passen?

 nick -  01-01-2021

ik zou graag willen weten of het mogelijk is om de 1110001005 of de 1110001148 ook op een hanway raw 50 is te plaatsen aangezien deze ook op een agm caferacer past.