Homepage

Standard throttle cable for an SS50 or CD50, good replacement version.

Standard speedometer cable for an SS50 or CD50, color gray. Also very useful for: Honda CY50 Honda C320 and S90 with the driver in the brake plate, so not for the separate driver! Nice Japanese quality!

Exhaust standard, high model, fits SS50. (This exhaust is no longer available from Honda) Complete exhaust with heat shield. The exhaust is supplied with the original Honda mounting accessories for the heat shield and an exhaust gasket.

Restricted CDI unit (AC). Features an adjustable limiter. You can easily set the RPM limits yourself using the small switches. Suitable for almost all models with AC electronic ignition (CDI ignition) from Honda or Honda replicas, such as: Jincheng, Zhenhua, Skyteam AGM Caferacer, Hanway RAW 50, Skyteam Classic, etc. If you're unsure, check your 6-pin plug; this unit uses 5 active pins! Still in doubt? Just get in touch with us.

This indicator light fits various Honda 4-stroke mopeds. Features: Chrome finish. Suitable for left and right side mounting. Fits SS50, CL50, C50, CL70. Usable for CB50, CY50, XL50 (slightly smaller than original). Fits rear side of foreign C50 C70 OT & C90 OT models. This is an A-quality replacement part.

Complete 70cc cylinder kit. Provided with: - 70cc cylinder (47mm) in silver. - Piston, piston rings and piston pin. Suitable for the standard 50cc cylinder head. - Gasket kit. - Injector Suitable for: - Mash Fifty Euro5 - Mash X-Ride 50 Euro5. Suitable for Euro5 with ECU adjustment. for this set you can use the mapping with article no. 1110013606 Not sure if this fits your engine? Mail us for advice. For Mash fifty we recommend a gear ratio of 15T / 48T.

This headlight unit is suitable for various Honda 4-stroke mopeds. Features: Suitable for: SS50, CD50, Dax OT (large variant) and Chaly (large variant). Equipped with P15d type fitting. Identifiable by a flange with 3 tabs.

Clutch cable, 76cm long (we measure the outer cable). Color: black. Suitable for a: - SS50 or CD50 with the slightly rising standard handlebar. (75cm is standard with the flat handlebars). - Replica Dax, Skyteam, Zhenhua or Jincheng, with a +/- 10cm lower handlebar. (90cm is standard). - Replica PBR, Skyteam or Jincheng, with a +/- 10cm lower handlebar. (90cm is standard). Nipple size (for the handle on the handlebar): Both 6mm and 8mm. For the 6mm version, the plastic sleeve around the nipple can be removed.

Eurol Sportbike 5W-40 Fullsyn is a fully synthetic engine oil without friction modifiers, developed for 4-stroke motorcycles. At low temperatures, Eurol Sportbike Fullsyn 5W-40 and 5W-50 ensure a rapid build-up of the lubricating film, so the engine receives sufficient protection even during cold starts. Eurol Sportbike 5W-40 Fullsyn is based on ester technology which provides exceptional extra protection against wear, deposits, sludge, and oxidation. The oil offers optimized friction characteristics. This oil can also be used in motorcycle transmissions where an API SF, SG, SH, SJ, or SL oil is required. Eurol Sportbike 5W-40 Fullsyn is suitable under all conditions for touring, racing, and cross applications. Air entrainment and foaming are avoided even under the most severe conditions. Eurol Sportbike 5W-40 Fullsyn has low volatility, which minimizes thickening and oil consumption. Due to its well-balanced composition, this oil provides excellent protection for gears and wet clutches. Despite the extreme loads in gears, the thickener hardly breaks down, ensuring that even at high temperatures, the viscosity remains high enough to guarantee a strong lubricating film.