Homepage

Center Stand for CD50 and SS50! Improved design! Mounting tips: - A slightly longer spring is needed than the original one. - Do you use a high exhaust? Then make sure to add a stopper to prevent the stand from moving too far upward while riding.

Chain and sprocket set : a slightly taller ratio for 50cc, or ideal for a 70cc configuration. Mash Fifty! This set consists of: Custom-sized chain . A-grade quality from Kaizen maintenance parts! Front sprocket: 13 (for 17mm shaft). Rear sprocket: 48. Please note: The 17mm shaft is common for Euro 3 and Euro 4 Mash mopeds and Euro 5 models produced until early 2024. Later models have a 20mm drive shaft. Please measure your shaft carefully to ensure you order the correct version! Tip: For this front sprocket, use locking plate type 3 (1040080064). The chain we supply is from our own brand, Kaizen maintenance parts . It is a great-looking chain thanks to its deep black color. The quality is top-notch with a very high tensile strength, so it easily holds its own against DID chains!

Chain and sprocket set : the original standard gearing for a 50cc Hanway RAW 50, AGM Caferacer or Skyteam Classic . This set is supplied with the original size chain and sprockets (428) and consists of: Custom-sized chain . A-grade quality from Kaizen maintenance parts! Front sprocket: 12. Rear sprocket: 52. Please note: Not suitable for the Skyteam Rocket and AGM Luxury! Tip: To secure this front sprocket, use the following set: 1110008921. The chain we supply is from our own brand, Kaizen maintenance parts . It is a great-looking chain thanks to its deep black color. The quality is top-notch with a very high tensile strength, so it easily holds its own against DID chains!

Complete 70cc cylinder kit. Provided with: - 70cc cylinder (47mm) in silver. - Piston, piston rings and piston pin. Suitable for the standard 50cc cylinder head. - Gasket kit. - Injector Suitable for: - Mash Fifty Euro5 - Mash X-Ride 50 Euro5. Suitable for Euro5 with ECU adjustment. for this set you can use the mapping with article no. 1110013606 Not sure if this fits your engine? Mail us for advice. For Mash fifty we recommend a gear ratio of 15T / 48T.

Complete 70cc cylinder kit. Provided with: - 70cc cylinder (47mm) in black. - Piston, piston rings and piston pin. Suitable for the standard 50cc cylinder head. - Gasket kit. Suitable for: - Mash Fifty, Dirt track 50, X-Ride 50 (NOTE: not suitable for Euro5 without ECU tuning!) - Zhenhua Ape 50 - Orion RX50 - Hanway Scrambler 50 - Skyteam Ace 50, Ace 50-R, Scrambler 50 - Masai Scrambler 50, Black caf? 50 - Archive Caferacer AM-84, Scrambler AM-80 - For engine code: 139FMB-B (vertical cylinder). Not sure if this fits your engine? Mail us for advice. For Mash fifty we recommend a gear ratio of 15T / 48T. Note: If the moped runs too lean with 70cc, it is necessary to install a larger (m4) main jet in the carburettor.

Chain and sprocket set : ideally suited for the Mash Fifty and Scrambler with a 70cc or 85cc cylinder. Please note: The color of the rear sprocket may vary (silver or black), as they are supplied to us by the importer in mixed batches. This set consists of: Custom-sized chain . A-grade quality from Kaizen maintenance parts! Front sprocket: 15 (for 20mm shaft). Rear sprocket: 48. Please note: The 20mm shaft is common for Euro 5 models delivered from mid-2024 onwards. Not sure? Measure your drive shaft to ensure you order the correct version! Tip: For this front sprocket, use locking plate 1040080043. The chain we supply is from our own brand, Kaizen maintenance parts . It is a great-looking chain thanks to its deep black color. The quality is top-notch with a very high tensile strength, so it easily holds its own against DID chains!

Chain and sprocket set , front sprocket + 1 tooth compared to a standard Dutch Honda SS50Z K3. Choose this set if your SS50 no longer has a restrictor. Consists of: Custom-sized chain. Front sprocket 13. Rear sprocket 42. Tip: This front sprocket uses locking plate type 3 (1040080064). The chain we supply is from our own brand, Kaizen maintenance parts . It?s a great-looking chain thanks to its deep black color. The quality is top-notch with high tensile strength, so it easily holds its own against DID chains!