Sale

Standard ignition coil for a C50 C70 or an original 6v Dax. Nice quality! Suitable for breaker point iginition system

Front fork rubber. These fit for the SS50 and CD50.

Plate between the carburettor and the manifold. This prevents heat transfer from the manifold to the carburettor. This fits: SS50 and an Original 6 volt Dax

This product concerns the service to provide your Mash 50cc Euro 5 ECU with other software. Explanation: - Order this product - Send your ECU to us (mention your details in the package) - Mention the desired software (50cc or 70cc / 85cc version) - Your ECU will be programmed by us and sent back to you. If you prefer to receive a pre-programmed ECU, order part number 1110014030 If you then return a good ECU to us, you will receive the difference in price from us.

Oil cooler, black, with 4 rows and hose connection.

Steering bearing set C50 replacement, including balls

Nut set for the coupling. Can also serve as a replacement set if you currently have a small coupling nut. Note! Does not fit C310 and C320 types!

Cylinder kit with new piston of nice quality. This set fits: - Honda PC50 and PS50 (for pushrod version!). - Honda PF50, Novio and Amigo. Honda QA50.

Limited CDI unit (AC). Equipped with adjustable limit. Speeds possible by adjusting the switches. Suitable for almost all models with AC electronic ignition (CDI ignition) from Honda or replicas from Honda such as: Jincheng, Zhenhua, Skyteam. AGM cafe racer, Hanway RAW 50, Skyteam Classic, etc Compare if in doubt, use the 6-pin plug, of which 5 pins are in use! If in doubt, please contact us.

Connecting rod set. Suitable for SS50, C50, Dax, Z50A, Chaly.

Flywheel puller, for engines equipped with a starter motor. Thread: m28 x 1

Complete 70cc cylinder kit. Provided with: - 70cc cylinder (47mm) in black. - Piston, piston rings and piston pin. Suitable for the standard 50cc cylinder head. - Gasket kit. Suitable for: - Mash Fifty, Dirt track 50, X-Ride 50 (NOTE: not suitable for Euro5 without ECU tuning!) - Zhenhua Ape 50 - Orion RX50 - Hanway Scrambler 50 - Skyteam Ace 50, Ace 50-R, Scrambler 50 - Masai Scrambler 50, Black caf? 50 - Archive Caferacer AM-84, Scrambler AM-80 - For engine code: 139FMB-B (vertical cylinder). Not sure if this fits your engine? Mail us for advice. For Mash fifty we recommend a gear ratio of 15T / 48T. Note: If the moped runs too lean with 70cc, it is necessary to install a larger (m4) main jet in the carburettor.

Complete conversion kit to provide a CB50 or CY50 with CDI ignition and 12 volt electricity. The set is plug and play, with instructions. Advantages: - Much more electricity output: makes a 35 watt halogen headlight possible! - Much better battery charging current, all item which use power from the battery will work much more adequately! - No more breaker points, so maintenance-free, adjustment of old or worn breaker points is no longer necessary! - Much stronger reliable spark! - Much higher speeds possible than with the standard ignition: - 12,000 rpm and more is possible in combination with other fast parts such as the carburettor, exhaust so also very suitable if you want to refresh the tame character of a CB50 or CY50! Tip: also buy the right type of 12 volt bulbs. For detailed questions about this conversion set, please contact us. We can also install this set for you!

Honda Dax AB26, imported from Japan.  Milage: 8345km Year: 1995 Gears: 4 Type of clutch: semi-automatic Capacity: 50cc   Wheel size: 10" Brakes: Drum brakes front and rear Hard frame! Untouched! 100% original Honda! The advertised price includes 21% VAT (Netherlands). Additional costs: - Service and maintenance - Registration / export papers - Delivery to your home: Price and delivery time upon request - Would you like to have any changes to the moped? Our mechanics are happy to help. Are you interested in this moped or do you want to order a moped? Then contact us.  

Cylinder kit. This kit fits: - Honda PC50 and PS50 (for pushrod version!). - Honda Novio and Amigo. - Honda QA50. With 46mm bore, 60cc.

Front mudguard for an SS50 or CD50h. The best replacement part available! Much better in shape and much better chrome than the cheaper replacement mudguards! Also suitable als a replacement for S90 and TS50DX. Very critical? The chrome on the mounting brackets is a bit thin here and there and there may be a little spot in the chrome. But in general you can really call this a nice mudguard that is many times more beautiful than the cheaper alternative!

Universeel toepasbare zekeringhouder in de originele look. A-kwaliteit. voor 25mm tot ongeveer 32mm glas zekeringen. Wordt geleverd inclusief een zekering.

Complete ombouwset om de onderstaande bromfietsen met 6 volt systeem te voorzien van CDI ontsteking en 12 volt systeem. De pickup is door ons passend gemaakt zodat deze ontsteking goed in OT carters geplaatst kan worden. Het vliegwiel past op de krukas d.m.v. bijgeleverd pasbusje. Het vliegwiel is iets lichter dan een standaard vliegwiel, waardoor de motor wat feller op het gas gaat reageren! Het vliegwiel past in de meeste gevallen onder het originele deksel! Neem wanneer gewenst eerst even contact met ons op! Wij kunnen u een passend deksel adviseren of uitleggen wat er aangepast dient te worden. De dynamo opbrengst voor het licht is ongeveer 35 watt (hou hier rekening mee bij de keuze van de lampjes). De set wordt inbouw klaar geleverd, met inbouw instructie. Deze set is geschikt voor: - SS50, CD50 (niet voor de benly modellen) Let op: heeft uw brommer een plat Hitachi vliegwiel? Dan past deze set niet! Neem bij twijffel eerst contact met ons op! Staat uw model hier niet letterlijk tussen? Informeer dan even of de set ook geschikt is voor uw brommer. Voordelen: - Meer licht opbrengst dan een 6 volt systeem maakt een 25 watt (halogeen) koplamp mogelijk! - Betere accu laadstroom, alles op de accu gaat dus adequater werken. - Geen contactpunten meer, dus onderhoudsvrij, afstellen van verlopen of versleten contactpunten is niet meer nodig! - Veel sterkere betrouwbare vonk! Tip: koop ook de juiste 12 volt lampjes erbij. Voor detail vragen over deze ombouwset kunt u contact met ons opnemen. Wij kunnen deze set ook voor u monteren.

Universal brake shoes for 110mm brake drum. A-quality. Usable for many models, such as: - SS50, CD50, C50, C70, C90, S90, Dax, Monkey. - CB50 & CY50. - C310 & C320 both A and S. - Skyteam Dax, Monkey, PBR. - Zhenhua Dax, Monkey, Ape 50 & 125.

Complete 2-discs clutch kit. This clutch has two double coated friction discs. Comes with the transmission gears from the crankshaft to the gearbox. Ideal kit to upgrade the old 1-disc clutch of the Honda SS50 or CD50! Universally applicable for most Honda engine with horizontal cylinder and manual clutch. Primary gear (small) 18 teeth. Secondary gear (large) 67 teeth.

Universal 6 volt horn, color black. Operates on DC. Suitable for almost all Honda mopeds with a 6 volt system, such as: SS50, CD50, C50, C70, C90, CB50, CY50, Dax, Monkey.

Excellent quality fast camshaft. A fast camshaft provides more power at high revs. Fits : - Skyteam & Zhenhua engines. - Zongshen and Lifan 50cc & 70cc engines.? - Jincheng engines.? - Also suitable for many larger replacement engines from 90cc to 125cc. However, because of the large variety in engines, please contact us if you are in doubt! In some cases, different valve springs are required. Our advice is to order the valve springs with item number 1030090036.

Counter, suitable for SS50 and CD50, including replacement sockets. Comes standard with 12 volt lights. If you need 6 volt lights, order number: 1110001065 (three pieces in this counter).

Chain and sprockets set, with slightly lighter teeth than standard. Suitable for a 50cc Skyteam Classic, Hanway RAW 50 and AGM Caferacer. Comes with the original size chain and sprockets (428). This set consists of: - DID chain (good Japanese quality!) - Front sprocket 12. - Rear sprocket 56. Note: Not suitable for Skyteam Rocket and AGM Luxury!! To secure this sprocket use the following set: 1110008921

Chain and sprockets set, the original standard ratio for a Honda SS50Z K3. Consists of: - High quality chain from 4stroke-parts! - Front sprocket 12. - Rear sprocket 42. Tip: To this front sprocket fits lock plate type 2 (1040080063) with shoulder bolts (1110000561).

Standard ignition coil for a SS50 & CD50. Nice quality! For breaker point ignition.