Textile side bags for Mash. Including mounting bracket to ensures that the bags hang nicely straight and do not hit the shock absorbers! For example suitable for the Mash Fifty 50cc moped and 125cc & 250cc models from Mash such as the Seventy Five and Caferacer. Tip: a bag set does not go together with a rack!

Bolt set for the complete engine. Suitable for: - SS50 & CD50. - C50, C70, C90 NT without starter. - OT Dax & Monkey

Bolt set for the complete engine. Suitable for: - SS50 & CD50. Also usable for: - C50, C70, C90 NT without starter motor. - OT Dax & Monkey. The set contains: 3 X M6-12 2 X M6-16 5 X M6-20 2 X M6-28 1 X M6-36 7 X M6-40 1 X M6-50 2 X M6-56 4 X M6-63 4 X M6-65

Brake conversion kit for a replica Dax such as: Skyteam, Zhenhua and Jincheng disc version. The caliper can be mounted on the same support as the standard caliper, without making any adjustments. The set includes: - Brake caliper with 4 pistons. - 200mm floating brake disc. Provides significantly more braking power!

Brake caliper with brake pads, brake pump with lever and hose. The set is already filled with brake fluid and bled, so ready for installation. Very useful for many replicas such as: Skyteam / Zhenhua Dax, PBR or Monkey. This brake pump has no mounting point for a mirror.

Throttle slide cover set for the standard carburettor of a XL80. Original from Honda

Complete conversion kit to provide the following models with CDI ignition and 12 volt electricity. (Light flywheel variant). The pick-up coil is fitted by us so that this ignition can be properly placed in OT crankcases. The flywheel fits on the crankshaft by means of the supplied adapter sleeve. The flywheel is slightly lighter than a standard flywheel, which makes the engine react a bit more fast to the throttle! The flywheel fits under the original cover in most cases! If desired, please contact us first! We can advise you on a suitable cover or explain what needs to be adjusted. The dynamo output for the light is approximately 35 watts (keep this in mind when choosing the bulbs). The set is plug and play, with installation instructions. Available for: Please indicate with your order for which type you order this set. - Dax 6 volts, Chaly 6 volts & Monkey 6 volts. S?lectionnez le type de connecteurs auquel l'allumage actuel est connect? au faisceau?: - Bouchons de balle de 3,5 mm - prise 4 broches - Prise 6 broches Note: does your Dax, Monkey or C50 a flat Hitachi flywheel? Then this set does not fit! If in doubt, please contact us first! Is your model not literally listed here? Then inquire whether the set is also suitable for your moped. Advantages: - More light output than a 6 volt system makes a 25 watt halogen headlight possible! - Better battery charging current, so everything on the battery will work more adequately. - No more contact points, so maintenance-free, adjustment of expired or worn contact points is no longer necessary! - Much stronger reliable spark! Tip: also buy the correct 12 volt lights. For detailed questions about this conversion kit, please contact us. We can also assemble this set for you.

CDI ignition set from the Japanese brand Takegawa. Suitable for the OT engine of a Chaly (6 volt crankshaft). In our opinion also very suitable for other types with some minor adjustments to the wiring (we still have to test it ourselves!!)

CDI ignition set, suitable for OT engines with 6 volt crankshaft. Light flywheel variant. The pick-up coil is fitted by us so that this ignition can be properly placed in OT crankcases. The flywheel fits on the crankshaft by means of the supplied adapter sleeve. The flywheel is slightly lighter than a standard flywheel, which makes the engine react a bit more fast to the throttle! The alternator output for the light is approximately 35 watts (keep this in mind when choosing the bulbs). Fits for example on: SS50, C50 & C70 Dax OT, Monkey OT, etc?. Also available as a complete set: 1110007282. You can also get all the information you need :-)

CDI ontsteking set van het Japanse merk Takegawa.

Original chain tensioner from Honda, with large hole for the hollow axle. Complete with nuts and washers. Suitable for example for: CD50, C50, C70, C90. Matching right side tensioner: 1040080019

Nice chain tensioner set, with suitable hole for the hollow axle, in original look. Complete with nuts and washers. Suitable for example for: CD50, C50, C70, C90.